 |
Using
the finest materials, construction techniques and specially
custom designed loudspeakers, this range of bass cabinets
perfectly complement the power and performance of the 7400
Dynamic Bass Amplifier.
The
custom built loudspeakers all feature ultra rugged cast chassis
construction, massive magnet assemblies, high temperature
voice coils and specially re-inforced cone systems to handle
the high continuous levels and awesome power peaks produced
by the 7400. Constructed from the highest grade heavy duty
Birch plywood, the cabinets rely on the renowned Marshall
'corner-lock' technique and have fully anchored front and
rear baffles for maximum strength and durability.
Extensive
front, back and side bracing ensures a clean even response,
even at the highest volume levels. Each cabinet is ported
and carefully tuned, integrating perfectly with other models
in the range to cover the entire spectrum of bass sounds and
styles.
|
7412
Cabinet
4x12 (800 Watts RMS, 4 Ohms).
In
the past 12 inch speaker configurations have been overlooked
by many bass system manufacturers.
Recognising
how much the 4x12 cabinet has to offer, Marshall's bass
design team devoted considerable engineering time into
perfecting the model 7412's specially designed speakers
and cabinet. The 7412 combines many of the best characteristics
of 2x15 and 4x10 cabinets offering tons of bottom end
combined with rapid transient attack. This is the ideal
cabinet for playing situations requiring a single speaker
cabinet with maximum tonal response.
Dimensions
(mm): H 1000 x W 698 x D 489.
Weight
: 74Kg.
|
 |
 |
7115
Cabinet
1x15 (300 Watts RMS, 8 Ohms).
The
ideal cabinet to form the foundation of your bass system
especially when used in conjunction with 10" or 12"
speaker variants. The drive unit of the 7115 gives excellent
low end response but is complemented by enough top end
to provide a well balanced, high performance cabinet.
Dimensions
(mm): H 698 x W 698 x D 380.
Weight
: 40Kg.
|
|
7212
Cabinet
2x12 with horn (400 Watts RMS, 4 Ohms).
Tight
and punchy with good all round response the 7212 bridges
the gap between 15" and 10" speaker systems in a format
offered by few manufacturers. The high quality moving
coil HF horn adds extra snap to the transient attack
of the 7212 and can be controlled using the built in
6 position attenuator.
Dimensions
(mm): H 698 x W 698 x D 380.
Weight
: 46Kg.
|
 |
 |
7210
Cabinet
2x10 with horn (400 Watts RMS, 4 Ohms).
If
you want to add bright, vibrant top end to your system
-this is the ideal cabinet. Neat and portable the 7210
perfectly complements any of the other cabinets in the
range adding dynamic punch and fast percussive response.
The crisp highs provided by the high quality horn can
be adjusted via the 6 position attenuator on the rear
of the cabinet.
Dimensions
(mm): H 385 x W 698 x D 380.
Weight
: 32Kg.
|
|
7400
Speakon Connectors
Every
7400 Series cabinet comes with it's own Speakon connector
cable. Spares are available in case of loss or damage.
Order Code: SSC.
|
|
 |
7215
Cabinet
2x15 (600 Watts RMS, 4 Ohms).
Unbeatable
for great all round bass response with particular emphasis
on the low end. The Model 7215 includes drive units
designed to achieve superb, high sensitivity bass response
at the heart of your cabinet system, but with a complementary
balanced high end which will provide enough presence
and attack to allow it to be used alone.
Dimensions
(mm): H 1000 x W 698 x D 489
Weight
: 64Kg.
|
|
7410
Cabinet
4x10 with horn (800 Watts RMS, 4 Ohms).
Unusually
deep bass response for this type of cabinet, coupled
with superb transient attack from the built in high
frequency horn, which features a six position attenuation
control. Tight and punchy with good snap and attack,
the 7410 totally suits the up front style of bass playing
that has become the trademark of many forms of modern
music.
Dimensions
(mm): H 698 x W 698 x D 380.
Weight
: 57Kg.
|
|
|
|
